Verbatim NAS HARD DRIVE User's Guide download pdf (Page 36)

3332

addresses for these e-mail notices.

Pop-Up Notiﬁcation

In addition to e-mail notiﬁcation, the product has the capability to use the Windows

Messenger service to display a pop-up message on your computer screen. To enable

this feature, check the box marked “Enable” and ﬁll in the form provided with the

hostnames of up to ﬁve (5) computers that will receive these pop-up notices. This

feature requires that your computer’s Messenger service is enabled and running, and

that your network administrator has not blocked the service.

Pop-Up notiﬁcation is not supported under Vista or Windows 7.

Network Service

The Network Service group of settings provides control over the built-in DHCP server,

Bonjour protocol, and Media Server. Additionally, if another service has been installed

using the “Install New Service” feature, the menu for this installed service will be shown

here.

DHCP Server

Most LAN environments will already have a Dynamic Host Conﬁguration Protocol (DHCP)

service running to automatically issue IP addresses for attached devices. For example,

your home router equipment will likely provide this service. In the rare case that your

equipment does not provide this service, the NAS drive can run its built-in DHCP Server.

To access the main screen for DHCP Server enter Advanced / Network Service / DHCP

Server.

To enable the DHCP Server, check the box marked “Enable Server”. It is disabled by

factory default setting.

A form is provided to optionally control the way addresses will be issued to clients from

the NAS drive’s DHCP Server. You may also set the maximum lease duration from the pull-

down menu. When done with this form, press Save to save your changes.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

No comments

Verbatim NAS HARD DRIVE User's Guide Page 36