Verbatim NAS HARD DRIVE User's Guide download pdf (Page 35)

3130

Disk Usage

Basic information about your hard disk, such as total and free space, can be displayed by

selecting Advanced / System / Disk Usage. If you have a USB storage device connected

to one of your USB-A ports as described previously under “Attaching a USB Storage

Device”, then you will also see information about this device on the screen.

Error Notiﬁcation

The NAS drive features a range of features to monitor product status and to report errors.

To enable and setup these features, select the screen at Advanced / System / Error

Notiﬁcation. These settings are grouped into four sections, as described below. After

completing this form, press Save to save your changes.

Monitoring Services

Here you may select which of the following four functions you would like to monitor:

• Disk Usage. A message will be generated when storage use reaches approximately

90% of total capacity.

• Windows File Sharing Server. A message will be generated as a result of an error

detected with the Samba protocol.

• FTP Server. A message will be generated as a result of a detected FTP error.

• DHCP Server. A message will be generated as a result of an error detected with the

DHCP Server.

Check Interval

Enter how frequently you would like functions to be checked. The options are hourly or

daily.

E-mail Notiﬁcation

NAS drive has the capability to send you an e-mail message containing status

information for the functions being monitored. To enable this feature, check the box

marked “Enable” and ﬁll in the form provided with the IP address of the mail server

that will process your automatic e-mail notices. Also ﬁll in up to ﬁve (5) destination mail

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

No comments

Verbatim NAS HARD DRIVE User's Guide Page 35